Shandong Tongxin Aluminium Industry Co., Ltd
Shandong Tongxin Aluminium Industry Co., Ltd
Add to Cart
Consists of a core alloy with braze clad on one or two sides,and in many cases a core alloy with a braze clad on the outside and a corrosion-resistant clad on the inner side of tube. The customer makes a tube by folding or welding the material.
Consists of a core alloy with braze clad on each side, and is primarily used in condenser applications.
The most basic heat exchanger material. Unclad fin consists of only alloy without clad layers.
Consists of a core aloy clad with braze clad on one or two sides. The rolled product is stamped or shaped by the customer depending on the application and used in most kinds of heat exchanger applications, either for coolant plates or manifolds.
Core Alloy: 3003
Cladding Alloy: 4343 4045 7072 etc.
Thickness: 0.09mm-0.6mm
Width: 30mm-900mm
Clad Rate: 8%-12% per side or customer requested
ID of Coil: 152mm, 200mm, 300mm ,etc
OD of Coil: 900mm-1350mm
Application: the material widely used for manufactuer radiators, condensers, evaporators,heat exchanger, intercoolers, engine oil coolers etc.
Min Order: 3 ton per size as trial
Delivery Time: within 15-25days after receipt of your deposit
Packing : export standard wooden box or pallet
We can gurantee product quality and offer very good service, another, our have many years experience of coating and export. If your have any question in the future time, your can freely contact us!
Contact Person: Manager Cong
Tel.:+86-531-83107167
Fax.+86-531-87868867
Mobile: 86-13355318076
Skype: tongxinaluminum
| Clad Aluminium Sheet/Strip for Heat Transfer | ||
| Material Alloy | Core Material | 3003, 3003+1%Zn, 3003+1.5%Zn, 3003+1.5%Zn+Zr, 3003+0.5%Cu, 3005, etc |
| Cladding Material | 4343, 4343+1%Zn, 4045, 4045+1%Zn, 4004, 7072, 5005, etc | |
| Clad Level | 4~18% (±1.5%) | |
| Temper | O, H14, H16, H18, H22, H24 , etc | |
| Size | As following specs sheet, or made on request | |
| Type | Sheet, Coil, Strip | |
| Tensile Strength | Depending on temper, 95Mpa~235Mpa | |
| Yield Strength | Depending on temper, 35Mpa~160Mpa | |
| Elongation | Depending on temper, 1%~15% | |
| Main Application | Heat exchanger, auto radiator, charge air cooler, evaporator, condenser, aluminium fin, header plate, HF welded pipe/tube, etc | |